2009-2018 Dodge RAM 1500 2wd 4.5"/3" Lift Kit W/ FOX Shocks - MaxTrac K882443F
MaxTrac Suspension K882443F offers a 4.5" lift spindle for the 2009-2018 Dodge Ram 1500 2wd platform. Designed from a single piece of ductile iron, it provides strength with a bolt on application. The spindle is also e-coated for corrosion protection, includes extended brake lines (DOT approved), and is backed by a limited lifetime warranty. The lift kit also comes with rear coils, sway bar extension brackets, track bar drop down bracket, and FOX rear shocks. The RAM kit will allow factory wheels & tires to bolt back on. This kit is made using the highest quality materials, so expect a great ride along with the additional lift you are looking for!
SPECIFICATIONS
MaxTrac K882443F 4.5/3" Lift Kit Includes:This MaxTrac Kit Will Lift Your Truck:
Wheel and Tire Fitment:
Notes:
Install Time -
Fits:
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
FOX LIMITED WARRANTY-
Limited one (1) year warranty on suspension products.This warranty is only applicable to FOX suspensions purchased new from an authorized FOX source and is made only to the original retail owner of the new FOX suspension product and is not transferable to subsequent owners. This warranty is void if the FOX suspension product is subjected to abuse, neglect , improper or unauthorized repair, improper or unauthorized service or maintenance, alteration, modification, accident or other abnormal, excessive, or improper use. Should it be determined by FOX in its sole and final discretion, that a FOX suspension product is covered by this warranty, it will be repaired or replaced, by a comparable model, at FOX's sole option, which will be conclusive and binding. This limited warranty does not apply to normal wear and tear, malfunctions or failures that result from abuse, improper assembly, neglect, alteration, improper maintenance, crash, misuse or collision. FOX Factory, Inc., a California corporation having offices at 130 Hangar Way, Watsonville, CA 95076 ("FOX”), makes the following LIMITED WARRANTY with respect to its suspension products.
Posted by Luke on …
I did a lot of research and for a 2wd this is the best I could find.
Fairly easy install, with the only issue being the sleeves on the Fox shocks.
The sleeves got left out of my kit so I had to contact MaxTrac but their customer service was fantastic and I had the sleeves by noon the following day.
Don't forget the carrier bearing spacer. Mine needed it (2017)
https://maxtracstore.com/2009-2015-dodge-ram-1500-2wd-carrier-bearing-spacer-kit-maxtrac-612400/
And also the front wheels get pushed out 1.5" so as another review said, you might want to get 1.5" spacers for your rear wheels so the match the front.
Posted by Leon on …
Installed this on my 2016 Ram 1500 Big Horn 2wd:
Kit was easy to install except that the Rear FOX shock metal sleeve was too small for the OEM bolts. The kit did include the correct size sleeve, but you have to push or pound out the sleeve that is on the shock already. It will be nice have the correct sleeve install into the the shock before shipping it out to the customer. That will save us almost an hr or two to install the metal sleeve (without the arbor press). I have to use a socket and a bolt that is slightly bigger to pound out the sleeve that was installed on Fox shock. You do have to drill a hole for track bar bracket. It will be nice to have a paper template that we can use as a guide to drill the hole. I do have to buy the Carrier Bearing Spacer Kit as my truck have 2 piece driveshaft (12+ Ram 1500)
Ride quality is almost like stock, but the rear is a little stiffer (which iI like). The front width did increased by 1.5" on each side, so you will need 1.5" rear hubcentric wheel spacers to make it even.
No rubbing issue with stock 275/60/20 tires.
Posted by Mike Pedersen on …
I put this on my 2014 RAM 1550 Sport Crew Cab in order to go from 33" to 35" tires. Shipping was fast and accurate. Rick advised and passed along the driveshaft bolts (2 piece driveshaft). If you are searching as I was for a good 2WD lift, this is it. You guys are awesome, great product & excellent service. 5/5!