2019-2023 Dodge RAM 1500 2wd 4/1" MaxTrac Lift Kit W/ Shocks - K882741

2 reviews Write a review

$877.57

SKU:
K882741
Estimated Shipping: Ships Same Day
Weight:
79.00 LBS
Promotion Eligible
Eligible For In Cart Promotions
Free Shipping Eligible
Minimum Purchase Required
SKU:
K882741
Estimated Shipping: Ships Same Day
Weight:
79.00 LBS

2019-2023 Dodge RAM 1500 2wd 4/1" MaxTrac Lift Kit W/ Shocks - K882741

Wouldn't it be great to lift your truck without sacrificing its comfortable ride? Make it happen by installing this MaxTrac Suspension K882741 4" front 1" rear lift kit that has been designed specifically for your 2wd 2019-2023 Dodge RAM 1500! MaxTrac achieves this by using 4" lift spindles and in the front, and 1.5" coil spacers along with MaxTrac Shocks for the rear. This kit has been engineered to maintain your vehicle's proper suspension geometry for an uncompromising smooth ride, and is one of the easiest and quickest to install lift kits on the market! Built using only the finest quality materials and powder coated for long lasting durability, this MaxTrac lift kit will not just meet your expectations, but exceed them!
SPECIFICATIONS
MaxTrac K882741 4/1" Lift Kit Includes:
  • P/N: 702740 Front 4" Lift Spindles W/ Extended DOT Approved Brake Lines
  • P/N: 902715 Rear Spacers and Sway Bar Brackets W/ MaxTrac Shocks
    • Rear 1.5" Coil Spacers
    • P/N: 2650SL-8 Rear MaxTrac Shocks

This MaxTrac Kit Will Lift Your Truck:

  • 4" In The Front
  • 1" In The Rear

Wheel and Tire Fitment:

  • Clears Up To 37" x 12.5" Tires With Correct Wheel and Tire Combination
  • Fits 18" x 9" Rims w/ 5-3/4" Backspacing or 20" x 9" Rims
  • Factory (Stock) Wheels and Tires Bolt Back On
  • Models with 22" Factory Wheels Will Need A New Wheel Bearing. Factory Bearing Has A Larger O.D. Than The Standard Bearing
Notes:
  • Excludes Classic 5 Lug Models
  • Why 2WD Spindles Will NOT Work On 4WD CLICK HERE
  • Answers On Backspacing and Spindles / Knuckles CLICK HERE
  • Does Not Fit Trucks With Factory 22s
  • Trucks with Factory 22s Will need to use the Hubs off non 22s model

Install Time -

  • 4 Hours
Fits:

  • 2019, 2020, 2021, 2022, 2023 Dodge RAM 1500 2wd
MaxTrac Suspension Part # K882741
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof. Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship. This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation. Max Trac reserves the right to change, modify or cancel this warranty without prior notice.

Reviews & Questions

2 Reviews Hide Reviews Show Reviews

  • 5
    Easy install

    Posted by Aaron on Mar 01, 2022

    Easy to install. Took about 4 hours by myself. Completely changed the look of my truck. Running 20x10 -18 offset with 35x12.50 tires. A little rub on full lock when backing up but I haven’t zip tied the plastics yet.

  • 5
    Easy to Install, excellent ride quality , super fast shipping

    Posted by Marco from Florida on Nov 02, 2021

    I installed this on a 2019 Dodge Ram 1500 5th gen 6 lug. I had Fox 2.0 leveling struts and just wasnt happy with the leveled look. I installed this kit in my driveway by myself. Hardest part was getting the ball joints to separate. I clear 35x12.5R20 Toyo AT3's on TIS 544GM 20x10 Rims with a negative 25 offset no problem. The spindle lift rides like OEM, no harsh rides. It also keeps the upper ball joints in geometry so no need for Upper Control Arms. Local dealer wanted $500 to install with alignment, they said it takes 3 hours to install. It took me about 5 hours to do front and back. Brake line's were a pain,. the back isn't extended like OEM, there about 1/2" shorter the block where the lines connect. They were a pain to do. Everything else was pretty easy. I rented a coil spring compressor and rear springs took a hour to do start to finish,. supper easy. Love the look ! I'm sitting at 42-1/2" front and rear to bottom of fenders perfectly level , great kit !