2015-2020 Ford F-150 2wd 4.5" Lift Spindles - MaxTrac 703440
Hottest New Release From MaxTrac!
The MaxTrac 703440 for 2015-2020 Ford F-150 4.5" features, 4.5" front lift spindles released at the 2015 SEMA Show! These ductile iron bad boys boast 4.5" of lift for your brand new 2015-2020 Ford F-150. The lift spindles are machined to precise OE specifications and come with extended DOT-approved brake lines. Making them compatible with the factory control arms, wheel hubs and exceed OEM standards. Providing the strength and durability you need, to handle a larger wheel and tire package.
SPECIFICATIONS
MaxTrac 4.5" Lift Spindles Include:
- 4.5"Lift Ductile Iron OE Quality Lift Spindles (Pair)
- Front Extended Brake Lines
Wheel and Tire Fitment:
- Clears 33" Tire With Proper Wheel Offset
- Increases Track Width 5/16" Per Side
- Keeps Factory Specifications On Steering and Suspension Geometry
- Minimum 17 x 8 Wheel With Maximum 5.25" Back Space
- Works With Factory Wheels
Notes:
- Always Measure Prior To Installation For Proper Wheel and Tire Fitment
- Trimming Maybe Required For Optimal Fender Well Clearance
- Why 2WD Spindles Will NOT Work On 4WD Click HERE
- Answers On Backspacing and Spindle / Knuckles Click HERE
- 2WD F-150 ONLY
Fits:
- 2015, 2016, 2017, 2018, 2019, 2020 Ford F-150 2wd
MaxTrac Suspension Part # 703440
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.