2009-2018 Ram 1500 V8 4wd 2"/4" Lowering Kit - MaxTrac K332424
MaxTrac K332424 Suspension has perfected the 2/4" lowering drop kit on the 4wd 2009-2018 Ram 1500. MaxTrac creates this by using 3" front adjustable lowering struts, 4" rear lowering coils, trac bar bracket, and MaxTrac shocks.
Install Time -
MaxTrac Suspension Part #K332424
Limited Lifetime Warranty is extended to the full line of MAXTRAC SUSPENSION, to be free from defects in workmanship and materials. MAXTRAC?s obligation is limited to repair or replacement at MAXTRAC?s discretion. MAXTRAC?s Warranty does not cover any costs incurred due to the installation or removal of products, towing costs, freight costs, rental vehicles, or incidental or associated costs. Warranty does not cover finish, race applications, incorrect installations, abuse, neglect, or commercial vehicles.
Posted by Barry Wilcox on …
Overall a great lowering kit. Installed on my 2017 Ram 4x4 reg cab. Used 2" drop position on front strut. Truck sits level and handles well. Couple issues are width of rear shock bushings narrower than stock shocks, creating need for couple thick 1/2" washers on each end. Also spring clips to hold bottom of coil spring base (front) did not fit into grove, preventing locking ring from sliding over. Required about an hour with edge of a narrow file to correct depth of grooves. Haven't had realignment yet, With this kit, it's possible to replace stock suspension if desired later.
Posted by Forest on …
Lowering kit went on well, the rear actually lowered right at 5".
Having the front adjust-ability was nice. Used the 2" setting, be sure to drive and let settle before measuring. Using the 3" on the front would require modifications to be able to align. The 2" setting the alignment just falls into place. Needed to cut 1/4" off tie rod ends to properly set toe in. Nice kit, truck drives just like it did, which was important
All prices are in USD