SKU:
K883164B
Availability:
Sorry, these are no longer available from MaxTrac Suspension
Estimated Shipping: Ships Same Day
Weight:
123.00 LBS
2009-2014 Ford F150 2wd (W/O Factory Lift Blocks) 6.5" Front 4" Rear Lift Kit W/ Bilstein Shocks - MaxTrac K883164B
MaxTrac K883164B offers a MaxPro 6.5" front and 4" rear lift kit with Bilstein shocks for your 2009-2014 Ford F150 2wd.
SPECIFICATIONS
MaxTrac 6.5/4" Lift Kit Includes:
- P/N: 703440 4" Front Ductile Steel Lift Spindles With Extended Front Brake Lines
- P/N: 833125 2.5" Front Bolt On Strut Spacers
- P/N: 813140 4" Rear Lift Blocks
- P/N: 913111 Rear U-Bolts
- P/N: 770928-4 Bilstein Rear Shocks
Wheel and Tire Fitment:
- Track Width Increases .5” Per Side
- 17" Wheel or Larger With 6.25" Backspacing or Less
- Clears 35" x 12.50 Tire With The Correct Wheel and Tire Combination (Up to 9"Wide Wheels)
- Works With Stock Wheels
Notes:
- For Use On F150 WITHOUT Factory Blocks
- Lift Kit With MaxTrac Shocks (K883164)
- 6.5/4" Lift Kit With Factory Lift Blocks With MaxTrac Shocks (K883165)
- 6.5/4" Lift Kit With Factory Lift Blocks With Bilstein Shocks (K883165B)
- Prior To Installation Measuring Required When Selecting Wheel and Tire Combination
- Trimming Maybe Required For Optimal Fender Well Clearance
- 2WD ONLY
- Why 2WD Spindles Will NOT Work On 4WD Click HERE
- Answers On Backspacing and Spindle / Knuckles Click HERE
Fits:
- 2009, 2010, 2011, 2012, 2013, 2014 Ford F150 2wd
MaxTrac Suspension Part # K883164B
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
