SKU:
K881343.1
Estimated Shipping: Ships Next Monday
Weight:
71.00 LBS
2007-2018 GMC Sierra 1500 2wd 4.5/2" Lift Kit W/ MaxTrac Shocks - MaxTrac K881343
MaxTrac Suspension K881343 is proud to introduce the 4.5/2" lift kit with shocks for your 2wd 2007-2018 GMC Sierra 1500 with cast steel suspension. The lift kit is a simple bolt-on with no welding, cutting or grinding required, making installation a breeze. The front lift is comprised of solid ductile iron 4.5" lift spindles, and DOT approved stainless braided brake lines. Rear lift is achieved via 3" lift blocks with U-bolts, and a pair of MaxTrac gas charged shocks.
SPECIFICATIONS
MaxTrac 4.5/2" Lift Kit Includes:
- P/N: 701345 Front 4.5" Lift Spindles With DOT Approved Extended Brake Lines
- P/N: 901330 Rear 2" (3") Lift With MaxTrac Shocks
This MaxTrac Kit Will Lift Your Truck:
- 4.5" In The Front
- 2" In The Rear
- Clears Up To 33" x 12.50" Tires With Correct Wheel and Tire Combination
- Track Width Increase 1" Per Side
- 17" Wheels or Larger
- With 4 ¾” Backspacing or Less
Notes:
- Lift Kit With FOX Shocks (K881343F)
- 2WD ONLY
- Fits Cast Steel Suspension Models ONLY
- Typically Sierra Comes With 1” Factory Block. Factory Block Is Removed During Installation Of The Lift Blocks
- Why 2WD Spindles Will NOT Work On 4WD CLICK HERE
- Answers On Backspacing and Spindle / Knuckles CLICK HERE
Install Time -
- 5 Hours
- 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 GMC Sierra 1500 2wd W/ Cast Steel Suspension
MaxTrac Suspension Part # K881343.1
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
