SKU:
703030B
Estimated Shipping: Ships Same Day
Weight:
54.00 LBS
2001-2009 Ford Ranger 2wd Coil Suspension (Non Stabilitrak) 4" Lift Spindles - MaxTrac 703030B
MaxTrac 703030B Suspension offers a 4" lift spindle on the 2wd 2001-2009 Ford Ranger. The lift spindles maintain vehicle geometry and keep the truck riding smooth, while increasing track width by half an inch. The moderate lift height provides enough clearance for much bigger wheels and tires for either a more aggressive street look or the base for some off-road fun. Made from ductile iron, these heavy duty 4" lift spindles are a true bolt on component and exceed OEM specifications.
SPECIFICATIONS
MaxTrac 4" Lift Spindles Include:
- Front 4" Lift Spindles
Wheel and Tire Fitment:
- Increases Track Width +0.5"
- Clears Up To 31" Tires With Correct Wheel and Tire Combination
- 15" Wheel Or Larger
- With 3.75" Backspace Or Less
Notes:
- Used In 6/3" Lift Kit (K883053-4)
- Used In 6/3" Lift Kit (K883053-6)
- Used In 4/2" Lift Kit (K883032)
- Prior To Installation Measuring Required When Selecting Wheel and Tire Combination
- Trimming Might Be Required For Optimal Fender Well Clearance
- Will NOT Work On Stabilitrack
- 2wd Coil Spring Models ONLY
- Why 2wd Spindles Will NOT Work On 4wd CLICK HERE
- Answers On Backspacing and Spindle / Knuckles CLICK HERE
- Installation Instructions CLICK HERE
Fits:
- 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Ford Ranger 2wd
MaxTrac Suspension Part #703030B
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
