SKU:
410520.12
Estimated Shipping: Ships Same Day
Weight:
6.00 LBS
1998-2009 Ford Ranger 2wd/4wd Torsion Bar (Non Stabilitrak) 2" Rear Lift Shackles - MaxTrac 410520
MaxTrac Suspension 410520 provides 2" rear lifting shackles for your torsion bar (non stabilitrak) 1998-2009 Ford Ranger. MaxTrac offers up rear lowering shackles as a sure fire way to get the back end of your truck out of that stink bug stance. These shackles give a minor lift in the rear, depending on application, anywhere from 1" to 2". Get your truck sitting level in an hour, easily installed and of better quality than the OE parts being replaced. Constructed of solid steel, urethane bushings, and powder coated in gunmetal, these give you the look you're after.
SPECIFICATIONS
Applications:
- 1988-1998 C1500 & C2500 2" Rear Lowering Shackles
- 1999-2015 Silverado Sierra 2" Lowering Shackles
- 1992-1999 Suburban / Tahoe / Yukon 2" Lowering Shackles
- 1997-2004 F150 2" Lowering Shackles
- 1998-2009 Ford Ranger 2" Lift Shackles
Info-
- Drop: 2"
- Outside of Bushing: 3.000-
- Inside of Shackle: 3.000+
- Eye-Eye: 7.500"
- 2nd Hole: Yes, -1"
- Bolt Size: 14mm
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Ford Ranger 2wd/4wd
*Can be used for lifting or lowering (make/model specific)
MaxTrac Suspension Part #410520.12
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
