1982-2004 Chevy S-10 2wd 3" Lift Spindles W/ Extended Brake Lines - MaxTrac 700130

No reviews yet Write a review

$518.30

SKU:
700130
Estimated Shipping: Ships Same Day
Weight:
54.00 LBS
Promotion Eligible
Eligible For In Cart Promotions
Free Shipping Eligible
Minimum Purchase Required
SKU:
700130
Estimated Shipping: Ships Same Day
Weight:
54.00 LBS

1982-2004 Chevy S-10 2wd 3" Lift Spindles W/ Extended Brake Lines - MaxTrac 700130

MaxTrac 700130 offers 3" lift spindles with extended brake lines for your 2wd 1982-2004 Chevy S10. MaxTrac Suspension's lifted spindles are a simple, but extremely effective way of gaining additional clearance in the front of your vehicle. By simply replacing your stock spindle, you can achieve an additional 3" 's while using stock control arms, springs, and shocks. Maxtrac's spindles are made from Ductile Iron, and are designed to be 100% bolt on, with no modifications necessary.
 
SPECIFICATIONS
 
Wheel Fitment:

  • 15" wheel w/ 3 3/4" backspacing or less
These rear lift spindles fit the:
 
  • 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Chevy S-10 2wd
*Parts will only fit 82-97 BLAZER / JIMMY 2WD
*Prior to installation—measuring is required when selecting a wheel & tire combination
 
 
MaxTrac Suspension Part #700130
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof. Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship. This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation. Max Trac reserves the right to change, modify or cancel this warranty without prior notice.

Reviews & Questions