2019-2023 GM 1500 2wd/4wd Pickup 3/5" Spindle Lowering Kit - MaxTrac KS331935S

1 review Write a review

$1,220.53

SKU:
KS331935S
Estimated Shipping: Ships Same Day
Weight:
63.00 LBS
Promotion Eligible
Eligible For In Cart Promotions
Free Shipping Eligible
Minimum Purchase Required
SKU:
KS331935S
Estimated Shipping: Ships Same Day
Weight:
63.00 LBS

2019-2023 GM 1500 2wd/4wd Pickup 3/5" Spindle Lowering Kit - MaxTrac KS331935S

MaxTrac Suspension KS331935S has perfected the 3/5" lowering drop kit on the 2wd or 4wd 2019-2023 GM 1500. MaxTrac creates the drop by using all new 2" drop spindles in the front. The spindles are machined to exact tolerances to ensure a perfect fit every time! The An all new 5" rear flip kit and rear MaxTrac shocks helps complete the kit to give you that perfect lowered stance!
 
SPECIFICATIONS
 
MaxTrac 3/5" Lowering Kit Includes:
  • Premium 2" Drop Spindles
  • Adjustable Drop Struts
  • Rear Axle Flip Kit
  • Rear Lift Hanger Inserts
  • MaxTrac Rear Shocks
  • Hardware
  • Instructions

Notes-

  • Does Not Fit Aluminum Mono Leaf Rear Suspension

Install Time -

  • 7 Hours
Fits:
  • 2019, 2020, 2021, 2022, 2023 Chevy Silverado 1500 2wd/4wd
  • 2019, 2020, 2021, 2022, 2023 GMC Sierra 1500 2wd/4wd
MaxTrac Suspension Part # KS331935S
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof. Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship. This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation. Max Trac reserves the right to change, modify or cancel this warranty without prior notice.

Reviews & Questions

1 Review Hide Reviews Show Reviews

  • 4
    Nice kit. Only found one flaw.

    Posted by Kevin on Mar 20, 2021

    Be careful installing 1/2 inch trans plate. Directions state to use factory bolts. They are too short. You will pull threads from trans if trying to reach proper torque. Luckily I felt it before it did strip. Replaced with 1/2 inch longer bolt and washer. All ok after that. Just a heads up. Hopefully they will update directions and kit. Other than that, it was a smooth process. All hardware was nice.