2016.5-2018 Chevy Silverado 1500 2wd (2pc Drive Shaft) 4/6" Lowering Kit - MaxTrac KA331546LB
MaxTrac Suspension KA331546LB 4/6" lowering kit provides the tools needed to get your 2wd 2016.5-2018 Chevy Silverado 1500 lowered in dramatic style. This MaxTrac kit will lower your truck 4" in the front using 2" lowering spindles and 2" lowering springs. In the rear, this kit will drop your vehicle 6" using an axle relocator, lifting hangers, a carrier bearing kit, and MaxTrac rear shocks. Built using only the finest quality materials, this lowering kit will not only boost your handling, cornering and steering response, but it will also step up your ride's style, presence, and attitude! Our kit will surely leave you with nothing but a good feeling behind the wheel! Mounting hardware is included as well for a complete install.
This MaxTrac Drop Kit Includes:
- P/N: 101520 2" Lowering Spindle
- P/N: 251520-6 2" Lowering Springs (If single cab)
- P/N: 251520-8 2" Lowering Springs (If extended cab)
- P/N: 251520-8 2" Lowering Springs (If crew cab)
- P/N: 201360LB 5-6" Adj. Rear Flip Kit W/ Carrier Bearing And MaxTrac Shocks
- P/N: 201360 5-6" Adj. Rear Flip Kit W/ MaxTrac Shocks
- P/N: 301360 Rear 5-6" Adjustable Flip Kit
- P/N: 2000LL-4 Rear MaxTrac Shocks
- P/N: 611500 2 Pc Drive Shaft Carrier Bearing Kit
Notes-
- Fits Stamped Steel And Aluminum Suspension Models ONLY
- Must Use 18" Wheels Or Larger
- 2wd ONLY
- Long Bed
- Wil NOT Fit Silverado W/ Magneride
- Please Specify Cab Size When Ordering
- 2016.5, 2017, 2018 Chevy Silverado 1500 (2pc Drive Shaft) 2wd
MaxTrac Suspension Part # KA331546LB
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
