2016-2018 Chevy & GMC 1500 2wd/4wd Adjustable 3/5" or 4/6" Lowering Kit - MaxTrac KC331336
MaxTrac Suspension KC331336 introduces an adjustable 3/5" or 4/6" lowering kit for the 2016-2018 Chevy & GMC 1500 2wd or 4wd with Stamped Steel or Aluminum Control Arms. This adjustable 3/5", 4/6" drop kit consists of 2" front lowering spindles along with adjustable 0-3" front lowering struts. In the rear we have MaxTracs tried and true adjustable 5-6" Flip Kit with Hangers. To complete the kit, MaxTrac also includes their high quality rear drop shocks. This kit is proudly made in the USA and is designed to provide the best ride quality with the perfect stance.
SPECIFICATIONS
MaxTrac 3/5" or 4/6" Adjustable Lowering Kit Includes:
- P/N: 101520C 2" Front Lowering Spindles
- P/N: 371303 0-3" Front Adjustable Lowering Struts
- P/N: 201360 5-6" Rear Adjustable Flip Kit
- Rear Flip Kit
- Rear MaxTrac Shocks
- Hangers
- Bump Stops
Notes:
- Does NOT Fit Auto/Magneride Models
- Fits Stamped Steel or Aluminum Suspension Models ONLY
- Maxtrac Suspension Does Not Recommend Using Wheels Wider Than 9" Or Wheels With Less Than 4.5" Backspacing. Doing So Will Result In Voiding Any And All Manufacturer Warranties
Install Time -
Fits:
- 2016, 2017, 2018 GMC Sierra 1500 2wd/4wd w/ Stamped Steel or Aluminum Suspension
- 2016, 2017, 2018 Chevy Silverado 1500 2wd/4wd w/ Stamped Steel or Aluminum Suspension
MaxTrac Suspension Part #KC331336
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.