SKU:
947200-2
Estimated Shipping: Ships Same Day
Weight:
40.00 LBS
2014-2025 Dodge RAM 2500 / 3500 4wd Front Radius Arm Brackets - MaxTrac 947200-2
When you lift your 2014-2018 Dodge RAM 2500 4wd or 2013-2025 Dodge RAM 3500 4wd, you may notice increased tire and driveline wear as a result. MaxTrac has a solution for this with their all new 947200-2 Radius Arm Brackets! In addition to resetting caster and pinion angles, you'll also see an improvement in suspension and steering performance. Additionally, these brackets will help center the axles inside the wheel arches to help achieve optimum suspension movement. When you lift your truck, make sure you do it right with MaxTrac!
Kit Includes-
- Radius Arm Brackets
- Hardware
- Instructions
Used In :
- RAM 2500 8" MaxPro Lift Kits (K947285 & K947485)
- Radius Arm System w/ MaxTrac Shocks
- RAM 2500 8" MaxPro Elite Lift Kits (K947285F& K947485F)
- Radius Arm System w/ FOX Shocks
- RAM 3500 8" MaxPro Lift Kits (K947385 & K947585)
- Radius Arm System w/ MaxTrac Shocks
- RAM 3500 8" MaxPro Elite Lift Kits (K947585F & K947585F)
- Radius Arm System w/ FOX Shocks
Notes-
- Will Work On MOST 4", 6", or 8" Lift Kit
- Must Use Stock Radius Arms
- Will NOT Work On Leveled Trucks
- Intended For 4-6 But will work on the leveled truck
- It Is Not Recommended To Use Wheels Wider Than 9" or Wheels With Less Than 4.5" Backspacing
Fits:
- 2014, 2015, 2016, 2017, 2018 Dodge RAM 2500 4wd
- 2013, 2014, 2015, 2016, 2017, 2018 Dodge RAM 3500 4wd
- 2019, 2020, 2021, 2022, 2023, 2024, 2025 Ram 2500/3500 4wd
MaxTrac Suspension Part # 947200-2
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.