2014-2018 GMC Sierra 1500 2wd/4wd (1pc Drive Shaft) Crew Cab 2/4" Lowering Kit - MaxTrac K331524-8
MaxTrac Suspension K331524-8 2/4" lowering kit for your 2wd/4wd 2014-2018 GMC Sierra 1500 Crew Cab (1 pc Drive Shaft) offers a moderate drop height that gives you the lowered stance, but not something extreme enough to have to creep up driveways. This kit utilizes 2" lowering springs in the front, and a full flip kit, lifting hangers, shackles, and MaxTrac shocks in the rear. All parts are custom engineered to your vehicle to ensure a perfect fit, and their construction provides quality that you can depend on! Plus, all components are backed by a limited lifetime warranty!
SPECIFICATIONS
MaxTrac 2/4" Lowering Kit Includes:
- P/N: 251520-8 Front 2" Lowering Springs
- P/N: 201340 3-4" Rear Flip Kit
- P/N: 301340 Rear 3-4" Adjustable Flip Kit
- P/N: 2200LL-4 Rear MaxTrac Shocks
Notes:
- Lowering Kit For 2 Piece Drive Shaft (K331524LB)
- 2/4" Lowering Kit For 1 Piece Drive Shaft With 2" Drop Spindles (KS331524T)
- 2/4" Lowering Kit For 2 Piece Drive Shaft With 2" Drop Spindles (KS331524LB)
- 1 Piece Drive Shaft ONLY
- Crew Cab Short Bed ONLY
- Does Not Fit Aluminum Or Stamped Steel Arms
Install Time -
Fits:
- 2014, 2015, 2016, 2017, 2018 GMC Sierra 1500 2wd (1pc Drive Shaft)
- 2014, 2015, 2016, 2017, 2018 GMC Sierra 1500 4wd (1pc Drive Shaft)
MaxTrac Suspension Part # K331524-8.3
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.