2014-2018 Chevy Silverado 1500 (Long Wheel Base) 5-6" Adj. Rear Flip Kit W/ Shock Extenders And Carrier Bearing - MaxTrac 201560LB
MaxTrac Suspension 201560LB 5-6" adjustable rear flip kit provides the tools needed to get your 2014-2018 Chevy Silverado 1500 Long Wheel Base lowered in dramatic style. Good thing the rear of the 2014-2018 models is versatile, allowing anywhere from a 4" to a 7" drop on the rear of their vehicles. This flip kit comes complete with all parts required to lower your truck 5" to 6" through an axle relocator, lifting hangers, rear shock extenders, and a carrier bearing kit. The carrier bearing kit can help you eliminate driveshaft vibrations by shimming down the carrier bearing so that the rear drive shaft angle is as close to the factory drive angle as possible. All parts are 100% made in the USA using only the finest quality materials, and are powder coated for long lasting durability. Our kit will sure leave you with nothing but a good feeling behind the wheel! Mounting hardware is included as well for a complete install.
SPECIFICATIONS
This MaxTrac 5-6" Rear Flip Kit Includes:
- P/N: 201560 5-6" Adj. Rear Flip Kit And Shock Extenders
- P/N: 301360 5-6" Adjustable Rear Flip Kit
- P/N: 401500 Rear Shock Extenders
- P/N: 611500 2 Pc Drive Shaft Carrier Bearing Kit
Notes:
- Long Wheel Base Models ONLY
Fits:
- 2014, 2015, 2016, 2017, 2018 Chevy Silverado 1500 Long Wheel Base
Made in the USA
MaxTrac Suspension Part # 201560LB
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
