2013-2018 Dodge RAM 1500 4wd 2.5" Front Lift Kit - MaxTrac K832525
MaxTrac K832525 Suspension is proud to release a 2.5" front leveling kit 4wd 2013-2018 Dodge RAM 1500. The design features a 1" coil spacer as well as a 1.5" strut spacer safely giving you 2.5" of lift. Using this design allows correct A-Arm angle that does not over extend the throw of the balljoint. MaxTrac strut spacer features 1/4" steel plates that are welded bolt hole to bolt hole for strength and our coil spacers are made using 1/2" solid steel. Unlike some companies who use a 2.5" coil spacer (only), MaxTrac split the difference with the coil spacer and strut spacer to keep the strut from topping out which improves the ride. As always the lift kit is built with competitive pricing in mind, and is finished in MaxTrac signature grey, high quality powder coat for durability and rust prevention.
SPECIFICATIONS
MaxTrac 2.5" Front Leveling Kit Includes:
- Front 1" Coil Spacer
- P/N: 832515 Front 1.5" Strut Spacer
Wheel and Tire Fitment:
- Clears 33" Tire With Correct Wheel and Tire Combination
Notes:
- 4WD Front ONLY
- Prior To Installation Measuring Required When Selecting Wheel and Tire Combination
- Trimming Might Be Required For Optimal Fender Well Clearance
- Installation Instructions CLICK HERE
Fits:
- 2013, 2014, 2015, 2016, 2017, 2018 Dodge RAM 1500 4wd All Cabs
MaxTrac Suspension Part #K832525
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
