2009-2025 Dodge RAM 1500 2/4wd 1.5" Lift Rear Coil Spacer (Pair) - MaxTrac 1628

3 reviews Write a review

$75.68

SKU:
1628.18
Estimated Shipping: Ships Next Monday
Weight:
2.00 LBS
Promotion Eligible
Eligible For In Cart Promotions
Free Shipping Eligible
Minimum Purchase Required
SKU:
1628.18
Estimated Shipping: Ships Next Monday
Weight:
2.00 LBS

2009-2025 Dodge RAM 1500 2/4wd 1.5" Lift Rear Coil Spacer (Pair) - MaxTrac 1628

MaxTrac 1628 offers 1.5" rear coil spacers for your 2/4wd 2009-2025 Dodge RAM 1500. MaxTrac’s coil spacers are the simplest, most economical, and most effective way of boosting the rear end of your vehicle by 1.5” to increase the rear profile, or to add clearance. Our coil spacers are made of OEM quality forged aluminum for the ultimate strength and reliability. These are designed to be direct bolt on installation, not requiring any cutting, welding or other modification to your stock vehicle.

These coil spacers fit:

  • 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 Dodge RAM 1500 2/4wd

MaxTrac Suspension Part #1628

Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof. Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship. This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation. Max Trac reserves the right to change, modify or cancel this warranty without prior notice.

Reviews & Questions

3 Reviews Hide Reviews Show Reviews

  • 3
    Not polyurethane.

    Posted by Unknown on Mar 18, 2021

    These are aluminum. They fit perfectly. Should function just fine. But they are not polyurethane. I bought them because the ad says polyurethane. I didn't want to go through the hassle of returning them. I'm sure they counted on that. I installed them. They sit flush. Look good. But they aren't polyurethane.

  • 5
    Perfect addition to the 2.5" front coil spring and shock replacement through Maxtrac

    Posted by David Lowell on Aug 15, 2020

    I bought these along with the 2.5" kit to level and raise the front. I'm glad I did since the front kit actually raised it slightly more than 2.5" and I can't stand looking at a truck that has a higher front vs rear; looks odd. After doing the front using these 1.5" Coil Spacers kept my rear about 1/2" to 1" higher, only really visible if you're looking at a tape measure - looks perfectly level - I wanted it very slightly higher in rear in case I throw a few things in the bed of the truck; they're very easy to install and very nice quality. I would suggest to anyone to purchase these if they're leveling their RAM 1500 using the 2.5" Front Coil Spring and Shock kit. Thanks Maxtrac - you made my awesome Ram even better.

  • 5
    Works Great

    Posted by Unknown on Jun 06, 2020

    I looked at polyurethane ones, and other brands… These are amazing quality, and actually fit over the lobe on the axle. Do their job and do it well.