SKU:
K333224
Estimated Shipping: Ships Next Monday
Weight:
80.00 LBS
2009-2014 Ford F-150 2wd 2/4" Lowering Kit W/ Spindles - MaxTrac K333224
Have an easier time driving your 2wd 2009-2014 Ford F-150 by lowering it using this MaxTrac K333224 2/4" lowering kit that includes forged aluminum drop spindles in the front and MaxTrac struts in the rear. Among the benefits of a lower ride height are reduced wind resistance and a lower, more stable center of gravity. This improves your vehicle’s handling and lessens its chances of rolling over. Because the kit incorporates stock components in the assembly, your vehicle will still retain its smooth, factory like ride quality. Plus, this MaxTrac lowering kit will help achieve a sportier and more aggressive appearance.
SPECIFICATIONS
MaxTrac 2/4" Lowering Kit Includes:
- 0-3" Front Forged Aluminum Drop Spindles
- 4" Flip Kit
- Hangers
- Bump Stops
- Rear Shocks
Notes:
- Works Will All Wheel Sizes
- Works On All Cab/Bed Configurations
- Requires 22" Aftermarket Rims Or Larger W/ 6" Backspacing Or Less
- Most Factory 20" Rims Will Fit
- Factory 22" Rims Will Not Fit
- May Require Ball Joint Trimming
- Max Trac Suspension Does Not Recommend Using Wheels Wider Than 9" Or Wheels With Less Than 4.5" Backspacing. Doing So Will Result In Voiding Any And All Manufacturer Warranties
Install Time -
- 6 Hours
Fits:
- 2009, 2010, 2011, 2012, 2013, 2014 Ford F-150 2wd
MaxTrac Suspension Part # K333224
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
