SKU:
706735
Estimated Shipping: Ships Same Day
Weight:
78.00 LBS
2007-2021 Toyota Tundra 2wd 3.5" Lift Spindles W/ Extended Brake Lines - MaxTrac 706735
MaxTrac 706735 offers 3.5" lift spindles with extended brake lines for your 2007-2021 Toyota Tundra. MaxTrac Suspension has introduced a new option to replace the light, fragile, stock steering knuckles on the Toyota Tundra platform. These 3.5" lifted spindles are a beefy piece of machinery, constructed out of ductile iron one-piece cast design, a giant upgrade over the OEM parts. With a true increase in ground clearance, this gives you options for bigger wheels and tires, new places to explore, and the confidence in solid parts handling it all. Due to these lifted spindles maintaining stock steering geometry, you can continue to run the OEM front struts / coilovers, along with being able to continue to modify your suspension with additional strut spacers, aftermarket coilovers, or new control arms which utilize the stock mounting components. These spindles also come with extended DOT approved brake lines.
SPECIFICATIONS
Wheel Fitment:
- 18" wheels or larger with a 6.5" backspacing or less
- Will clear up to 33" tires with the correct wheel & tire combination
- Increases track width 1" per side
- Will Fit XSP & XSP-X
- Will Fit TRD-Pro You Will Need To Turn The Coilovers Down
These lift spindles fit:
- 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Toyota Tundra 2wd
*Trimming may be required for optimal fender well clearance
Installation Instructions Click HERE
MaxTrac Suspension Part #706735
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
