2007-2018 Jeep JK Wrangler Extended Rear Sway Bar End Links - MaxTrac 8897RSB

No reviews yet Write a review

$49.54

SKU:
8897RSB
Estimated Shipping: Ships Same Day
Weight:
4.00 LBS
Promotion Eligible
Eligible For In Cart Promotions
Free Shipping Eligible
Minimum Purchase Required
SKU:
8897RSB
Estimated Shipping: Ships Same Day
Weight:
4.00 LBS

2007-2018 Jeep JK Wrangler Extended Rear Sway Bar End Links - MaxTrac 8897RSB

MaxTrac 8897RSB offers an extended rear sway bar end links for your 2007-2018 Jeep Wrangler JK. In 2007 Jeep introduced the new JK Wrangler. There were many upgrades from the older version including an electronic sway bar disconnect for the Rubicon models. The sway bar drop will not work with the Wrangler new version so MaxTrac have produced an extended sway bar link to span the increased distance from sway bar to axle at full drop. The sway bar end links are made of solid steel tube with polyurethane ends and come with all of the necessary hardware for easy installation.
 
SPECIFICATIONS
 
  • Required On 2007-2012 Jeep Rubicon With Electronic Sway Bar Disconnect
  • Polyurethane Bushings
  • Powder Coated
  • Hardware Included
Notes:
 
  • Installation Instructions CLICK HERE
  • Using MaxTrac 3" Coil Lifts On Rubicon With Electronic Sway Bar Disconnect The Extended Rear Sway Bar End Link Must Be Used
Fits:
 
  • 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Jeep JK Wrangler
MaxTrac Suspension Part #8897RSB
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof. Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship. This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation. Max Trac reserves the right to change, modify or cancel this warranty without prior notice.

Reviews & Questions