SKU:
706440-D/P
Estimated Shipping: Ships Same Day
Weight:
65.00 LBS
2006-2014 Toyota FJ Cruiser / 4Runner 2wd 4" Lift Spindle Single Side (R or L) - MaxTrac 706440-D/P
MaxTrac Suspension 706440-D/P has arrived with a towering 4" lift spindle for your 2wd 2006-2014 Toyota FJ Cruiser and 4Runner platforms. Designing something truly unique for this large year range of Toyota FJ Cruiser and 4Runners was no easy task. The 4" lifted spindles achieve superior ground clearance over anything else on the market. Designed from a single piece of ductile iron, these pieces are massive upgrades to the stock steering knuckle. A bolt-on piece, which allow either stock shocks and coil springs, or modified for even greater height, leaves the installation and alignment a breeze. As per all of MaxTrac™ spindles, the 706440-D/P single side 4" Lift Spindle is e-coated for corrosion protection, and backed by a limited lifetime warranty.
SPECIFICATIONS
Wheel Fitment:
- 17" wheel w/ 4.75" or less backspacing
- Will clear up to a 33" tire with the correct wheel & tire combination
These lift spindles fit:
- 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Toyota FJ Cruiser 2wd
*Trimming may be required for optimal fender well clearance
Installation Instructions Click HERE
MaxTrac Suspension Part # 706440-D/P
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
