2005-2023 Toyota Tacoma (6 Lug) Tubular Upper Control Arms - MaxTrac 856800
MaxTrac 856800 offers the all new tubular upper control arms for your 6 lug 2005-2023 Toyota Tacoma. MaxTrac Suspension has introduced a new option to replace the light, fragile, stock control arms on the Toyota Tacoma. These fabricated tubular control arms are a beefy piece of machinery, constructed out of high quality materials and are a giant upgrade over the OEM parts. These fabricated control arms, part # 856800, are fabricated using high strength D.O.M tubing bonded together with MaxTrac’s staple, quality welds. These arms utilize a factory style, vulcanized rubber bushing that never squeaks and never has to be greased along with a durable, high strength ball joint at the spindle side. To complete the package, MaxTrac coats them in their signature grey powder coat for a durable, rust free finish. In addition to the prestige these arms will bring, they also have corrective alignment parameters built in for an increased quality of drivability.
These 856800 Control Arms Include-
- 2 Tubular Upper Control Arms
- OE Style Rubber Bushings
- OE Style Balljoints
- Lifetime Warranty
- Instructions
- Hardware
These Control Arms Fit-
- 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Tacoma (6 Lug) 2wd/4wd
MaxTrac Suspension Part #856800
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.