SKU:
702235
Estimated Shipping: Ships Next Monday
Weight:
62.00 LBS
2003-2008 Dodge RAM 2500 2wd 3.5" Lift Spindles W/ Extended Brake Lines - MaxTrac 702235
MaxTrac 702235 offers 3.5" lift spindles with extended brake lines for your 2wd 2003-2008 Dodge RAM 2500. Solid, indestructable, proven - these are the qualities you want for important parts on your truck. Our single piece ductile iron lift spindles provide more stability than anything that comes stock from the factory, reinforcing key mounting locations like upper ball joint mounts and tie rod ends. Proven sturdiness show that these new spindles will stand up to the toughest conditions. Give your truck the height required to fit those larger wheels and tires and to eliminate the enormous rake, with simple bolt on parts that require no cutting, welding, or additional parts to accommodate. Extended stainless steel brake lines, DOT approved, come equipped with our lift spindles, rather than cost-cutting bracket extensions found in other kits.
SPECIFICATIONS
Wheel & Tire Fitment:
- Will clear up to a 33" tires with the correct wheel & tire combination
- 17" wheel or larger with 4.75" backspace or less
- Track width increase 1 3/8 per side
- FITS DUALLY AS WELL
- 2003, 2004, 2005, 2006, 2007, 2008 Dodge RAM 2500 2wd
Installation Instructions Click HERE
MaxTrac Suspension Part #702235
Videos Hide Videos Show Videos
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
