1999-2006 GMC Sierra 1500 4wd 5" Rear Lowering Kit - MaxTrac 200950T
MaxTrac Suspension 200950T 5" rear lowering kit for your 4wd 1999-2006 GMC Sierra 1500 provides the easiest and quickest way to lower the rear of your truck, so that every turn of the wheel will feel more responsive and commanding. By getting this easy to install MaxTrac lowering kit, your ride will be brought down closer to the ground with the highest quality parts available! This kit comes with a 5" rear flip kit, C frame support, angle corrector, shackles, torsion keys, and MaxTrac shocks. When you're dropping your Sierra to low profile levels, it's recommended to install a C frame support, which requires the cutting of the frame, with a large notched area for added travel between the frame and the axle. The angle corrector is designed to provide extreme stability for a lowered vehicle. All hardware is included.
SPECIFICATIONS
This MaxTrac 5" Lowering Kit Includes:
- 5" Rear Flip Kit
- C Frame Support
- Rear Single Shock Angle Corrector
- Shackles
- Front Torsion Keys
- Rear MaxTrac Shocks
Notes:
- 4wd ONLY
- Cutting Required To Install C Frame Support
- Used In 3/5" Lowering Kit With MaxTrac Shocks (KS330935)
Fits:
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 GMC Sierra 1500 4wd
Made in the USA
MaxTrac Suspension Part # 200950T
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof.
Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship.
This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation.
Max Trac reserves the right to change, modify or cancel this warranty without prior notice.
