1988-1998 Chevy Silverado 1500 2wd 2/4" Lowering Kit W/ No Shocks - MaxTrac KS330524-NS

No reviews yet Write a review

$454.21

SKU:
KS330524-NS
Estimated Shipping: Ships Same Day
Weight:
66.00 LBS
Promotion Eligible
Eligible For In Cart Promotions
Free Shipping Eligible
Minimum Purchase Required
SKU:
KS330524-NS
Estimated Shipping: Ships Same Day
Weight:
66.00 LBS

1988-1998 Chevy Silverado 1500 2wd 2/4" Lowering Kit W/ No Shocks - MaxTrac KS330524-NS

MaxTrac Suspension KS330524-NS has an all in one solution with a 2/4" lowering kit without shocks for your 1988-1998 Chevy Silverado 1500 2wd. Our kits provide the most essential pieces for lowering your truck the right way with 2" front spindles for the front. For the rear we do a 2" hanger & 2" shackle.

SPECIFICATIONS
 
This Kit Includes:

  • P/N: 100520L 2" Lowering Spindles (1" Thick Rotors)
  • P/N: 100520H 2" Lowering Spindles (1.25" Thick Rotors)
  • P/N: 410520 2" Rear Lowering Shackles
  • P/N: 420520 2" Rear Lowering Hangers

Notes:

  • Lowering Kit With MaxTrac Shocks (KS330524)
  • 2/4" Lowering Kit Coil Springs With MaxTrac Shocks (K330524)
  • 2/4" Lowering Kit Coil Springs No Shocks (K330524-NS)
  • 2WD ONLY
  • Please Specify Rotor Thickness When Ordering

Fits:

  • 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Chevy Silverado 1500 2wd
MaxTrac Suspension Part # KS330524-NS
Max Trac Suspension makes no warranty, expressed or implied, as to the merchantability, fitness for purpose, description, quality, productiveness, accuracy or any other matter with respect to every product, all such warranties being hereby specifically and expressly disclaimed by Max Trac. Max Trac may offer technical advice or assistance with regard to the products based on laboratory and/or field experience and customer understands and agrees that such advice represents only good faith opinions and does not constitute a warranty or guarantee. The sole and express warranty provided by Max Trac is to warrant that the products sold as listed comply with Max Trac’s specification at the date and time of manufacture. Max Trac makes no warranty that such products shall meet such specification at any time after installation of products. Use of such product is specifically not warranted, and Max Trac specifically excludes from this express warranty parts subject to normal wear and tear after one year, finish after one year, damage resulting from failure to follow recommendations in installation manuals, competition or off-road use, and damages caused by aftermarket products. Max Trac’s liability and customer’s exclusive remedy for any breach of this limited express warranty is limited to repair, replacement, or refund at Max Trac’s option and in Max Trac’s sole discretion. There are no warranties which extend beyond the description on the face hereof. Our limited lifetime warranty excludes the following items: bushings, bump stops, ball joints, tie rod ends, rod end/heim joints, and shock absorbers. These parts are subject to immediate wear and tear and are not considered defective when worn. They are warranted for twelve (12) months from the date of purchase only for defects in workmanship. This Max Trac warranty is void if (1) the vehicle is not aligned after kit installation, (2) proper maintenance is not routinely performed, (3) the Max Trac products are misused or abused in any way in either installation or service, or (4) the products are used in a way that violates federal, state, or local law or regulation in any respect. Max Trac is not responsible for vehicle compatibility with other aftermarket products. Warranty coverage does not include consumer opinions regarding ride comfort, fitment and design after product installation. Max Trac reserves the right to change, modify or cancel this warranty without prior notice.

Reviews & Questions